Model NO.: PB003
Certification: CE
Medical Devices Reg./Record No.: 2200424
Medical Device Regulatory Type: Type 2
Origin: China
HS Code: 90189020
Model NO.: PB003
Certification: CE
Medical Devices Reg./Record No.: 2200424
Medical Device Regulatory Type: Type 2
Origin: China
HS Code: 90189020
Product features:

1. one button operation
2. blood pressure and pulse measurement
3. automatin inflation and deflation
4. 199 sets memory
5. large LCD display
6. automatic switch off
7. low battery check
8.oscillometrin measuring method
9. high accuracy


Instruction manual 

Ce Certificate Talking Arm Blood Pressure Monitor for Monitoring




1. The the cuff on the arm as illustrated. Make certain that the lower edge of the cuff lies approximately 2 to 3cm above the elbow and thaat the rubber tube leaves the cuff in the linner side of the arm.
2. Secure the cuff with the Velcro closer in such a way that it lies comfortablely and is not too tight. Lay your arm on a table so that the cuff is at the same height as the heart, Make sure that the tube is not kinked.
3. After the cuff has been appropriately positioned. Press the ON/OFF-button. The pump begins to inflate the cuff, the measurement can begin.


Upper arm type blood pressure monitor its technology has experienced a "lack of core" of the first generation, "airless core" of the development of the second and third generation, its advantage is low requirements for measuring position, don't worry about the effects of position of error;
The disadvantage is that the volume is slightly larger. In winter, you need to take off your clothes and use 4 knots of alkaline batteries at a time.
Upper arm blood pressure monitor
 
Techniques used
MWDS technology
 
Measuring characteristics
Rapid pressure to a certain pressure value
 
The upper arm blood pressure meter is divided into three generations, namely g1-nibpm structure, g2-nibpm structure and g3-nibpm structure.
 
Second generation electronic blood pressure gauge g2-nibpm structure
 
Main components: pressurized air pump, electronic control exhaust valve, pressure pressure sensor
 
The techniques used: MWD technology
 
Measurement features: the adoption of the electronic control of the exhaust valve SERVO TECHNOLOGY (ECV SERVO TECHNOLOGY), constant speed exhaust truly constant speed, the speed of and can according to the measurement of blood pressure of intelligent pressure measurement result more stable (except other factors).
 
Third-generation electronic blood pressure gauge g3-nibpm structure
 
Main components: servo pressurized air pump, electronic control exhaust valve, pressure pressure sensor
Technology used: MWI technology
Measurement features: constant pressure and blood pressure measurement in the process of pressure.
 
There are three forms of blood pressure meter, one is upper arm type, the other is wrist type, and the third is finger type.
These three forms of blood pressure, the finger electronic blood pressure meter, even for healthy people, have been proved to be unusable.
Need special instructions, wrist electronic blood pressure monitor, does not apply to patients with blood circulation obstacle, such as diabetes, hyperlipidemia, hypertension disease accelerates atherosclerosis, causing peripheral circulatory disturbance.
These patients had a significant difference in their wrist and upper arm blood pressure measurements.
These patients and elderly should be advised to use the arm type electronic blood pressure meter.
In addition, you should take a field measure before purchasing, so that you can choose your own electronic blood pressure gauge.
 
 
1. Expand the arm band of the upper arm type electronic blood pressure meter to prevent the arm belt from falling off from the metal ring.
The upper arm blood pressure meter USES the icon
The upper arm blood pressure meter USES the icon
2. When measuring, if the weather is not cold, bare arm as much as possible, if you wear more clothes, don't roll up your cuffs when measuring, but take off your clothes.
3, wrap the armband set on the left arm, arm bands need higher than at the bottom of the elbow 2 ~ 3 cm, green mark should be Egypt on the inside of the arm, air pipe must be on the middle finger in the direction of extension cord.
Take the arm of the blood pressure gauge and hold it, pull it and wrap it tightly around the arm.
5. The upper arm blood pressure gauge can also be measured on the right arm. According to the above steps, the blood pressure can be measured accurately.
  Product features:

1. one button operation
2. blood pressure and pulse measurement
3. automatin inflation and deflation
4. 199 sets memory
5. large LCD display
6. automatic switch off
7. low battery check
8.oscillometrin measuring method
9. high accuracy


Instruction manual 

Ce Certificate Talking Arm Blood Pressure Monitor for Monitoring




1. The the cuff on the arm as illustrated. Make certain that the lower edge of the cuff lies approximately 2 to 3cm above the elbow and thaat the rubber tube leaves the cuff in the linner side of the arm.
2. Secure the cuff with the Velcro closer in such a way that it lies comfortablely and is not too tight. Lay your arm on a table so that the cuff is at the same height as the heart, Make sure that the tube is not kinked.
3. After the cuff has been appropriately positioned. Press the ON/OFF-button. The pump begins to inflate the cuff, the measurement can begin.


Upper arm type blood pressure monitor its technology has experienced a "lack of core" of the first generation, "airless core" of the development of the second and third generation, its advantage is low requirements for measuring position, don't worry about the effects of position of error;
The disadvantage is that the volume is slightly larger. In winter, you need to take off your clothes and use 4 knots of alkaline batteries at a time.
Upper arm blood pressure monitor
 
Techniques used
MWDS technology
 
Measuring characteristics
Rapid pressure to a certain pressure value
 
The upper arm blood pressure meter is divided into three generations, namely g1-nibpm structure, g2-nibpm structure and g3-nibpm structure.
 
Second generation electronic blood pressure gauge g2-nibpm structure
 
Main components: pressurized air pump, electronic control exhaust valve, pressure pressure sensor
 
The techniques used: MWD technology
 
Measurement features: the adoption of the electronic control of the exhaust valve SERVO TECHNOLOGY (ECV SERVO TECHNOLOGY), constant speed exhaust truly constant speed, the speed of and can according to the measurement of blood pressure of intelligent pressure measurement result more stable (except other factors).
 
Third-generation electronic blood pressure gauge g3-nibpm structure
 
Main components: servo pressurized air pump, electronic control exhaust valve, pressure pressure sensor
Technology used: MWI technology
Measurement features: constant pressure and blood pressure measurement in the process of pressure.
 
There are three forms of blood pressure meter, one is upper arm type, the other is wrist type, and the third is finger type.
These three forms of blood pressure, the finger electronic blood pressure meter, even for healthy people, have been proved to be unusable.
Need special instructions, wrist electronic blood pressure monitor, does not apply to patients with blood circulation obstacle, such as diabetes, hyperlipidemia, hypertension disease accelerates atherosclerosis, causing peripheral circulatory disturbance.
These patients had a significant difference in their wrist and upper arm blood pressure measurements.
These patients and elderly should be advised to use the arm type electronic blood pressure meter.
In addition, you should take a field measure before purchasing, so that you can choose your own electronic blood pressure gauge.
 
 
1. Expand the arm band of the upper arm type electronic blood pressure meter to prevent the arm belt from falling off from the metal ring.
The upper arm blood pressure meter USES the icon
The upper arm blood pressure meter USES the icon
2. When measuring, if the weather is not cold, bare arm as much as possible, if you wear more clothes, don't roll up your cuffs when measuring, but take off your clothes.
3, wrap the armband set on the left arm, arm bands need higher than at the bottom of the elbow 2 ~ 3 cm, green mark should be Egypt on the inside of the arm, air pipe must be on the middle finger in the direction of extension cord.
Take the arm of the blood pressure gauge and hold it, pull it and wrap it tightly around the arm.
5. The upper arm blood pressure gauge can also be measured on the right arm. According to the above steps, the blood pressure can be measured accurately.
 

Male Sex Enhancer

Anavar For Muscle,Vardenafil Powder,Male Hormones

Testosterone Raw Powders Co., Ltd. , http://www.nsrawpowders.com