The electrothermal constant temperature water tank can be used for distillation, drying, concentration and constant temperature heating, chemicals, biological products, checking serum and biochemical experiments, constant temperature culture, and boiling and disinfecting syringes and small surgical instruments. The electric heating constant temperature water tank produced by our factory has two specifications: HSX-600 type and HSX-420 type. This instrument is excellent in material selection, reasonable in structure, strong in corrosion resistance, beautiful in appearance, economical and practical, easy to operate, etc. It is the relevant unit. One of the essential ideal laboratory equipment.
I. Structural features: The outer shell of the product is made of high-quality cold-rolled steel plate, electrostatic spraying, the inner tank, the upper cover and the panel are made of high-quality stainless steel plate, and the heating method is heated by immersion electric heating tube. The temperature control adopts a high-precision temperature regulator, which can be adjusted freely within the range of use.
Second, the use of methods and precautions:
l. The water tank should be placed on the fixed platform. The power supply voltage must match the voltage required by the water tank. The power socket must be a three-hole safety socket. The ground wire must be connected before use.
2. Inject the clean water into the box before use. In order to shorten the heating time, hot water can also be injected.
3. Plug in the power supply, turn on the water tank switch, adjust the temperature control meter to reach the required set temperature. At this time, the electric heating tube starts to heat up, and the temperature inside the water tank starts to rise. When the temperature is close to the set temperature of 3~5 °C, the traffic lights start to alternate. Off, until the set temperature is reached, the red light is displayed for a long time and kept warm.
Third, repair and maintenance: temperature control instrument is a key component to control the temperature, has been accurately proofread before leaving the factory, if the control is found to be malfunctioning, in addition to checking the circuit, check whether the control instrument is faulty, or sent back to the company for maintenance.
Fourth, technical specifications: Model HSX-600HSX-420 effective volume 600 × 300 × 150mm3420 × 180 × 105mm3 power supply voltage 220V ± 10% 220V ± 10% rated power 2000W1000W power frequency 50Hz50Hz temperature use range 37 ~ 100 ° C 37 ~ 100 ° C temperature Uniformity ± l ° C ± l ° C temperature fluctuation ± O. 5 ° C ± O. 5 ° C
I. Structural features: The outer shell of the product is made of high-quality cold-rolled steel plate, electrostatic spraying, the inner tank, the upper cover and the panel are made of high-quality stainless steel plate, and the heating method is heated by immersion electric heating tube. The temperature control adopts a high-precision temperature regulator, which can be adjusted freely within the range of use.
Second, the use of methods and precautions:
l. The water tank should be placed on the fixed platform. The power supply voltage must match the voltage required by the water tank. The power socket must be a three-hole safety socket. The ground wire must be connected before use.
2. Inject the clean water into the box before use. In order to shorten the heating time, hot water can also be injected.
3. Plug in the power supply, turn on the water tank switch, adjust the temperature control meter to reach the required set temperature. At this time, the electric heating tube starts to heat up, and the temperature inside the water tank starts to rise. When the temperature is close to the set temperature of 3~5 °C, the traffic lights start to alternate. Off, until the set temperature is reached, the red light is displayed for a long time and kept warm.
Third, repair and maintenance: temperature control instrument is a key component to control the temperature, has been accurately proofread before leaving the factory, if the control is found to be malfunctioning, in addition to checking the circuit, check whether the control instrument is faulty, or sent back to the company for maintenance.
Fourth, technical specifications: Model HSX-600HSX-420 effective volume 600 × 300 × 150mm3420 × 180 × 105mm3 power supply voltage 220V ± 10% 220V ± 10% rated power 2000W1000W power frequency 50Hz50Hz temperature use range 37 ~ 100 ° C 37 ~ 100 ° C temperature Uniformity ± l ° C ± l ° C temperature fluctuation ± O. 5 ° C ± O. 5 ° C
Dingmin Pharmaceutical supply Ribociclib API and Ribociclib Intermediates with high purity and best price. The main products CAS No are as follows: 1211443-61-6, 733039-20-8, 1374639-76-5, 1374639-77-6, 1211443-58-1. Sample can be sent if you request.
Welcome to do business with us. Please email to us directly.
2-Chloro-7-Cyclopentyl,Ribociclib Intermediates,Cas 1374639-76-5
Shijiazhuang Dingmin pharmaceutical Sciences Co.,Ltd , https://www.dingminpharma.com