The Chinese medicine pelletizing machine can produce honey pills, concentrated pills, water honey pills, water pills, pellets, and can also be coated and dried. Make the prepared pills even and beautiful. It is especially suitable for small pharmaceutical factories, large and medium-sized pharmaceutical factory trial rooms, Chinese medicine research institutes, hospitals, private clinics, Chinese medicine stores, and valuable tonic products on-site processing and sales points. The whole machine is made of stainless steel and conforms to GMP standards. The utility model has the advantages of small volume, low energy consumption, high efficiency, low noise, no pollution, simple operation, safety and reliability, and the machine adopts 220V lighting power, and the electrode is convenient.

Chinese medicine pellet machine technical parameters:

Pill size: Φ4mm, Φ6mm, Φ8mm (optional two specifications).

Production capacity: 2-7kg / h (based on Φ6mm).

Motor output power: 0.18KW (host power), 1KW (electric heating power)

Motor voltage: 220V, 50HZ

Motor speed: 1440 rev / min Working speed: 50 rev / min Dimensions: 550 × 330 × 250mm

Machine weight: 32kg

Instructions for use of Chinese medicine pill machine 1. Before using this machine, remove the upper cover and the gear cover. A few drops of non-hydrated edible oil must be added to each oil eye, and then scrub the four rollers and the pill with medical alcohol. The parts in contact with each other are disinfected.

2. Reinstall and reset the upper cover and the gear cover, turn on the power, turn on the switch, and turn the machine for 1-2 minutes.

3. The uniformed pellets will be dispensed, put into the extruder in an appropriate amount, and then stripped, and then the strips will be placed into the pellets one by one and directly into pellets.

4. Coating: After the pill is made, it can be placed in a water pill coating machine and wrapped into a white, red and other outer garment.

5. Drying method: After the pill is made, the pill can be dried by entering the water pill coating device for electric heating. It can also be dried by the hot air of the hair dryer, or dried directly in the sun.

6. Polishing method: Put the pill in the water pill coating machine and roll continuously. The longer the rolling time, the smoother the surface.

Notice for users of Chinese medicine pill machine 1. This machine is suitable for ambient temperature of -5 ° C to 40 ° C, relative humidity less than 90%. There is no conductive dust and corrosive metal gas around, and it is placed in a ventilated and clean place.

2. When operating, there should be no other unrelated items on the work surface. The pelletizing machine is placed on a stable table. When the power supply voltage is confirmed, the power supply should be close to the table. The power socket must have a reliable grounding wire. It is strictly forbidden to pull the power cord hard to prevent the person from tipping over and breaking the pill. Machine and other accidents occurred.

3. After the machine is used, remove the hexagon socket screws, open the upper and lower parts with the roller as the boundary, remove the four rollers, scrub with medical alcohol, and then install the reset.

4. When scrubbing with medical alcohol, when changing the pelletizing roller, you must cut off the main power supply and pull out the power plug to avoid personal accidents.

5. When the pelletizing machine is in use, it is strictly forbidden to touch the pelletizing roller with hand and brush or other tools to avoid pinching the fingers. It is strictly forbidden to process the pellets under the protection of the upper cover and the gearbox cover. An unnecessary personal accident has occurred.

6. If the power cord is damaged (such as exposed bare wires), you must use a dedicated power cord. Go to the local office maintenance department to purchase replacement. In case of failure of the switch or socket, it must be stopped. It is strictly forbidden to change the line to continue to use. The opening or socket of the same specification should be replaced in time to avoid mechanical and personal accidents.

7. The crushing equipment for this machine can be selected from our DZL-20 flowing water Chinese medicine crusher or LS-250g to 500g swinging Chinese medicine crusher.

8. The water pill coating can be directly removed and washed when not in use. Rotate clockwise and pull it out. Place it in a reliable, clean place for use. Apply a small amount of clean, anhydrous cooking oil to the exposed part of the water pill to prevent rust. It is strictly forbidden to wash the whole machine or electric heater directly with water. When the unit is not in use, it must be placed in a dry, clean and ventilated place. During the use of electric heaters, it is strictly forbidden to contact with water to prevent electrical conduction and cause personal accidents such as electric shock.

Traffic Light Countdown Timer

LED traffic lights are an indispensable tool in urban traffic and an important guarantee for urban traffic order. This example is to implement a common traffic signal light function at an intersection. Readers can realize a more complete LED Traffic Light by learning this traffic light controller. For example, real-time configuration of the time of various traffic lights, manual control of the status of each light, etc.
Traffic at an intersection is generally divided into two directions, each direction has three types of red, green and yellow lights, and each direction also has a left turn light, so each direction has 4 lights.
This LED traffic light is also designed with a countdown traffic light display function for the status of each light. You can set an initial value for each light state, and after the light state changes, it starts to count down according to this initial value. After the countdown is reset to zero, the state of the light will change to the next state.

It is worth noting that the state of the traffic signal lights in the two directions is related. In other words, the state of the lights in each direction affects the state of the lights in the other direction, so that the traffic flow in the two directions can be coordinated. If the lights in each direction change independently, then the traffic lights have no meaning.

Red Green Countdown Timer,Traffic Light Countdown,Traffic Signal Countdown Timer,Traffic Light Timers

Shenzhen Wide Way Optoelectronics Co., Ltd. , https://www.wdmtrafficlight.com