The installation, debugging and use of the ice cream machine are actually very simple, but for the first time users still need to explain here, I hope this article can give you some useful reference.
Ice cream machine transportation:
In general, the packaging of ice cream machines is divided into two types, one is pure wood frame packaging, and the other is carton packaging. No matter which packaging method is used, it is convenient for transportation and use of the machine, due to the soft ice cream machine . The weight is between 150kg and 250kg, so one or two ordinary customers can't carry it. The regular cargo station will have a forklift for loading and unloading. However, some small cargo stations do not have these equipments and can only be manually loaded and unloaded. Therefore, during transportation. There is potential damage to the ice cream machine. The most common is that the appearance of the ice cream machine is bumped or has some scratches. Here, customers who purchase the machine are reminded that these collisions and scratches are inevitable and generally do not affect the device itself. The use of the impact, only serious scratches will have a certain impact on the aesthetics of the ice cream machine itself, this situation is generally rare, just to remind everyone. In this case, you can negotiate or claim with the shipping company.
The important thing to pay attention to during the handling of ice cream machine is not to tilt more than 30 degrees. After tilting and transporting, it should be placed for a period of time as much as possible. It is mainly worried about the refrigerant recirculation. Once the refrigerant returns to the compressor, it will be turned on. There may be damage to the compressor of the ice cream machine , so please be careful that the ice cream machine should not be placed or transported flat.
Ice cream machine installation:
Generally, the power supply requirements for ice cream machines used in China are mostly 220V/50HZ, while those abroad are 220V/60HZ, such as Korea, and some are 110V/60HZ, such as Japan. If you want to bring domestic machines to foreign countries or bring foreign machines After using it in China, after confirming the corresponding electrical requirements, you need to purchase the corresponding converter connection to use. Before use, connect the wiring of the ice cream machine to the three plugs or directly to the air switch. When selecting the connection plug, pay attention to the rated input power of the ice cream machine . Generally, the machine below 2.2KW uses 10 amp plug (10A plug), 2.2KW-3.5KW uses 16 amp plug (16A plug), Then the corresponding socket should use 10A or 16A socket. If the socket and the plug do not match, it will not be connected. If the power supply wiring below the rated current requirement is used, it may cause the power cable to heat up or short circuit. If you use electricity The aspect is not very understanding, just find an electrician to help pick up and it will be OK. In addition to using 380V power supply ice cream machine to be wired separately, make sure that your use of premises to meet the wiring requirements before buying.
Ice cream machine refrigeration system test:
After the power supply is completed, the next step is to debug the ice cream machine. Before commissioning, please disinfect and clean the ice cream machine . For disinfection and clarity, please refer to other related articles.
After the ice cream machine is cleaned, turn on the power, turn on the switch of the ice cream machine, the digital tube displays 00 words, press the start button (without discharging), the number on the LED digital display board of the ice cream machine will change. The sound of the compressor start will be heard in about 5 seconds, and then the number on the digital tube will be observed to change upwards (if the temperature control type digital tube will display the temperature changes continuously), the continuous change will indicate the cooling. The system is operating normally, and it is necessary to stop immediately, because the freezer will cause the freezing cylinder for a long time. If there is no change for a long time, there is a problem with the cooling system or a problem with the control board circuit. For the case where the ice cream machine without digital tube (such as Guangli 838) or the digital tube control circuit is damaged, the most effective way to check whether the refrigeration system is operating normally is to insert the dispensing valve body (front feed port) of the ice cream machine. Take out the agitator shaft and start the operation by directly touching the refrigeration cylinder to see if there is any change in temperature.
If the ice cream machine cooling properly, you can directly transfer a good pulp is poured into ice cream machine for initial production test machine, this time need to adjust the hardness of ice cream, adjust the firmness on to explain in the relevant articles. It is only necessary to adjust the softness to normal, and then normal operation and sales can be carried out.