Model NO.: MC-ES300
Working Temperature: From Ambient 90 Centigrade
Sample Arm Moves up and Down: 1centigrade
Reservoir: 1centigrade
Capacity: 3.1 L
Dimensions: (W*D*H) 560×530×350mm
Weight: 30kg
Trademark: MeCan
Specification: CE, FDA, ISO
Origin: Guangzhou
HS Code: 90189030
Model NO.: MC-ES300
Working Temperature: From Ambient 90 Centigrade
Sample Arm Moves up and Down: 1centigrade
Reservoir: 1centigrade
Capacity: 3.1 L
Dimensions: (W*D*H) 560×530×350mm
Weight: 30kg
Trademark: MeCan
Specification: CE, FDA, ISO
Origin: Guangzhou
HS Code: 90189030
Tissue Embedding System
Model: MC-ES300
Decription:
The Embedding center is composed of two modules, main console and Cryo Console. It is independent design, can put the position left-to-right or right-to-left, to meet different habits of customers. The large working surface allows user processing many samples at the same time. The temperature and work start time can be settable through the control panel.
Characteristics:
Main Console:
© The ergonomic large working surface allows processing many samples at same time.
© The large cold spot Peltier is designed to orient even small and big samples (Mega Cassettes).
© Work start time and day can be programmed automatically.
© The tissue embedding cassettes and base molds trays are removable and can be set at different temperatures.
Cryo Console:
© It is composed of a compressor cooled work surface held to chill the paraffin blocks rapidly.
© The Teflon coated surface allows a minimum ice formation and easy cleaning.
© Temperature is adjustable from ambient to-13centigrade.
© It can be used as a stand alone unit near the microtome station.
Technical data:
Main Console:
© Nominal supply voltage: 220V/50HZ or 110V/60HZ
© Maximum power draw: 1000VA
© Working temperature: From ambient 90 centigrade
© Increments: 1centigrade
© Capacity: Paraffin reservoir: 3.1 L
                    Cassetes/molds tray: 1.4L
© Dimensions:  (W*D*H) 560×530×350mm
© Weight: 30kg
Cryo Console:
© Nominal supply voltage: 220V/50HZor110V/60HZ
© Maximum power draw: 110VA
© Working temperature: From ambient to -20 centigrade
© Increments 1 centigrade
© Dimensions:  (W*D*H) 340mm * 540mm * 410mm
© Weight: 24kg
Tissue Embedding System
Tissue Embedding System
Model: MC-ES300
Decription:
The Embedding center is composed of two modules, main console and Cryo Console. It is independent design, can put the position left-to-right or right-to-left, to meet different habits of customers. The large working surface allows user processing many samples at the same time. The temperature and work start time can be settable through the control panel.
Characteristics:
Main Console:
© The ergonomic large working surface allows processing many samples at same time.
© The large cold spot Peltier is designed to orient even small and big samples (Mega Cassettes).
© Work start time and day can be programmed automatically.
© The tissue embedding cassettes and base molds trays are removable and can be set at different temperatures.
Cryo Console:
© It is composed of a compressor cooled work surface held to chill the paraffin blocks rapidly.
© The Teflon coated surface allows a minimum ice formation and easy cleaning.
© Temperature is adjustable from ambient to-13centigrade.
© It can be used as a stand alone unit near the microtome station.
Technical data:
Main Console:
© Nominal supply voltage: 220V/50HZ or 110V/60HZ
© Maximum power draw: 1000VA
© Working temperature: From ambient 90 centigrade
© Increments: 1centigrade
© Capacity: Paraffin reservoir: 3.1 L
                    Cassetes/molds tray: 1.4L
© Dimensions:  (W*D*H) 560×530×350mm
© Weight: 30kg
Cryo Console:
© Nominal supply voltage: 220V/50HZor110V/60HZ
© Maximum power draw: 110VA
© Working temperature: From ambient to -20 centigrade
© Increments 1 centigrade
© Dimensions:  (W*D*H) 340mm * 540mm * 410mm
© Weight: 24kg
Tissue Embedding System
ULITE Impact Drill have high power. 500W, 530W ,800W. Long longevity motor using. Quiet and smooth gear voice. Little sparkling. Variable speed and reversing switch. Bearing is C & U certificated in china. Using longevity is long. Worker using is high efficiency. Drill chuck is 13mm.
|
Safety
1. Be sure to carry out strictly the relevant rules or obey the explanation first.
2. The workpiece to be drilled must be paied more attention regulary when it is drilled.
3. Use the plug correctly. Don`t change the plug and wire separately. And don`t access to power if the plug wire is broken. Take off the plug in time when the electric drill isn`t used.
4. Don`t extend the length of the power wire, and keep the power wire away from the heat source and oil.
Operation
1. Pls use machine under accurate voltage.
2. Keep the tool in non-loading for one minute. Check the transmission position is flexible and make sure there is no abnormal. Check the inverting switch is normal.
3. The head of the drill is sharp, Pls don`t touch is when you are drilling. If the rotation speed is reduced abnormally or stop suddenly or get stuck. Please turn off the power immediately.
4. Carbon brush should be checked periodically and replaced in time. If the carbon brush is finished, the carbon brush end would contact with commutator. The motor would be burnt.
5. When it is in following conditions, Pls don`t be used and send to repair immediately.
a. The insulation is damaged.
b. The power wire or electric cable case is broken.
c. The plug and wire is broken.
d. The sparkle appears seriously
6. The tools must be grounded and avoid to be shocked.
Impact Drill
Impact Drill,Impact Cordless Drill,Electric Impact Drill,Corded Impact Drill
ZHE JIANG ULITE TOOLS MANUFACTURE CO.,LTD , http://www.ulitepowertool.com