Using a pulverizer to break water and forage grasses such as water hyacinths and water lettuces into pulp is a good feed for raising fry and rearing adult fish. This will not only greatly increase the utilization rate of forage grass, but also greatly facilitate the reproduction of plankton. According to experiments, every 10-15 kilograms of straw pulp is equivalent to a kilogram of soybeans. Every 1,000 kilograms of grass pulp can be cultivated for every 150-200 kilograms of straw. 30-50 kilograms of straw pulp can produce 1 kilogram of alfalfa, Squid spring piece. Use grass pulp for fish farming to grasp the following four clever.
Refining all kinds of aquatic plants before processing must be washed with clean water and disinfected with 3%-4% salt. When feeding, attention should be paid more than once, the proportion of grass and water should be coordinated, and the grass should be made as fine as possible in order to increase the suspension time of the straw particles in the water and increase the chance of fish consumption. If it is too thick, it will easily deposit water and deteriorate the water quality. Pay attention to maintaining the sharpness of the beater blade and the machine speed to ensure the quality of each pulp and improve the utilization of fresh grass.
Depending on the type, quantity, and water quality of the pond fish, the amount of straw fed by the straw should be controlled flexibly. It is advisable to use grass pulp to grow fish and feed 50-70 kilograms of water per mu per day. It is appropriate to cultivate seedlings. , Before the fry under the pool, use 100-150 kg of straw as the base fertilizer per acre of water in order to cultivate the food organisms in the water. After the fish are under the pond, they will be fed 50-100 kg per mu of water per day, or 120-1000 fish fry per day. 150 kg, feeding once every 2-3 days, feeding 15-20 days to go out. In order to allow the fish to fully ingest food, the whole pool should be sprayed evenly every day, 8-9 hours a day, and 2-3 hours a day to increase the chance of fish feeding and increase the utilization rate.
Clever control of water feeding grass pulp can easily cause pool water pollution, and new water must be constantly refilled to regulate water quality and increase oxygen content in the water and water space. During the rearing period, the hot slurry of lime is properly thrown in for sterilization and prevention. It can also neutralize the acidic substances produced by the decomposition of the straw, which is beneficial to the formation of bacterial flocs and the growth of plankton and increase fish production.
Cleverly collaborate in the rearing of reared or reared fingerlings or when feeding adult fish, try to avoid separate feeding of straw, and mix with fine material (grass pulp and concentrate ratio is 5-8:1). Feeding will be better. When water peanuts are used for pulping fish, because water peanuts contain saponin toxin, 2%-5% of salt should be added to the straw to remove the poison. Grass pulp should be fed in a timely manner after it is prepared. It should not be placed for too long to avoid contamination. Affects the quality of straw pulp and causes the fish to become ill. Using a pulverizer to break water and forage grasses such as water hyacinths and water lettuces into pulp is a good feed for raising fry and rearing adult fish. This will not only greatly increase the utilization rate of forage grass, but also greatly facilitate the reproduction of plankton. According to experiments, every 10-15 kilograms of straw pulp is equivalent to a kilogram of soybeans. Every 1,000 kilograms of grass pulp can be cultivated for every 150-200 kilograms of straw. 30-50 kilograms of straw pulp can produce 1 kilogram of alfalfa, Squid spring piece. Use grass pulp for fish farming to grasp the following four clever.
Refining all kinds of aquatic plants before processing must be washed with clean water and disinfected with 3%-4% salt. When feeding, attention should be paid more than once, the proportion of grass and water should be coordinated, and the grass should be made as fine as possible in order to increase the suspension time of the straw particles in the water and increase the chance of fish consumption. If it is too thick, it will easily deposit water and deteriorate the water quality. Pay attention to maintaining the sharpness of the beater blade and the machine speed to ensure the quality of each pulp and improve the utilization of fresh grass.
Depending on the type, quantity, and water quality of the pond fish, the amount of straw fed by the straw should be controlled flexibly. It is advisable to use grass pulp to grow fish and feed 50-70 kilograms of water per mu per day. It is appropriate to cultivate seedlings. , Before the fry under the pool, use 100-150 kg of straw as the base fertilizer per acre of water in order to cultivate the food organisms in the water. After the fish are under the pond, they will be fed 50-100 kg per mu of water per day, or 120-1000 fish fry per day. 150 kg, feeding once every 2-3 days, feeding 15-20 days to go out. In order to allow the fish to fully ingest food, the whole pool should be sprayed evenly every day, 8-9 hours a day, and 2-3 hours a day to increase the chance of fish feeding and increase the utilization rate.
Clever control of water feeding grass pulp can easily cause pool water pollution, and new water must be constantly refilled to regulate water quality and increase oxygen content in the water and water space. During the rearing period, the hot slurry of lime is properly thrown in for sterilization and prevention. It can also neutralize the acidic substances produced by the decomposition of the straw, which is beneficial to the formation of bacterial flocs and the growth of plankton and increase fish production.
Cleverly collaborate in the rearing of reared or reared fingerlings or when feeding adult fish, try to avoid separate feeding of straw, and mix with fine material (grass pulp and concentrate ratio is 5-8:1). Feeding will be better. When water peanuts are used for pulping fish, because water peanuts contain saponin toxin, 2%-5% of salt should be added to the straw to remove the poison. Grass pulp should be fed in a timely manner after it is prepared. It should not be placed for too long to avoid contamination. Affects the quality of straw pulp and causes the fish to become ill.
Refining all kinds of aquatic plants before processing must be washed with clean water and disinfected with 3%-4% salt. When feeding, attention should be paid more than once, the proportion of grass and water should be coordinated, and the grass should be made as fine as possible in order to increase the suspension time of the straw particles in the water and increase the chance of fish consumption. If it is too thick, it will easily deposit water and deteriorate the water quality. Pay attention to maintaining the sharpness of the beater blade and the machine speed to ensure the quality of each pulp and improve the utilization of fresh grass.
Depending on the type, quantity, and water quality of the pond fish, the amount of straw fed by the straw should be controlled flexibly. It is advisable to use grass pulp to grow fish and feed 50-70 kilograms of water per mu per day. It is appropriate to cultivate seedlings. , Before the fry under the pool, use 100-150 kg of straw as the base fertilizer per acre of water in order to cultivate the food organisms in the water. After the fish are under the pond, they will be fed 50-100 kg per mu of water per day, or 120-1000 fish fry per day. 150 kg, feeding once every 2-3 days, feeding 15-20 days to go out. In order to allow the fish to fully ingest food, the whole pool should be sprayed evenly every day, 8-9 hours a day, and 2-3 hours a day to increase the chance of fish feeding and increase the utilization rate.
Clever control of water feeding grass pulp can easily cause pool water pollution, and new water must be constantly refilled to regulate water quality and increase oxygen content in the water and water space. During the rearing period, the hot slurry of lime is properly thrown in for sterilization and prevention. It can also neutralize the acidic substances produced by the decomposition of the straw, which is beneficial to the formation of bacterial flocs and the growth of plankton and increase fish production.
Cleverly collaborate in the rearing of reared or reared fingerlings or when feeding adult fish, try to avoid separate feeding of straw, and mix with fine material (grass pulp and concentrate ratio is 5-8:1). Feeding will be better. When water peanuts are used for pulping fish, because water peanuts contain saponin toxin, 2%-5% of salt should be added to the straw to remove the poison. Grass pulp should be fed in a timely manner after it is prepared. It should not be placed for too long to avoid contamination. Affects the quality of straw pulp and causes the fish to become ill. Using a pulverizer to break water and forage grasses such as water hyacinths and water lettuces into pulp is a good feed for raising fry and rearing adult fish. This will not only greatly increase the utilization rate of forage grass, but also greatly facilitate the reproduction of plankton. According to experiments, every 10-15 kilograms of straw pulp is equivalent to a kilogram of soybeans. Every 1,000 kilograms of grass pulp can be cultivated for every 150-200 kilograms of straw. 30-50 kilograms of straw pulp can produce 1 kilogram of alfalfa, Squid spring piece. Use grass pulp for fish farming to grasp the following four clever.
Refining all kinds of aquatic plants before processing must be washed with clean water and disinfected with 3%-4% salt. When feeding, attention should be paid more than once, the proportion of grass and water should be coordinated, and the grass should be made as fine as possible in order to increase the suspension time of the straw particles in the water and increase the chance of fish consumption. If it is too thick, it will easily deposit water and deteriorate the water quality. Pay attention to maintaining the sharpness of the beater blade and the machine speed to ensure the quality of each pulp and improve the utilization of fresh grass.
Depending on the type, quantity, and water quality of the pond fish, the amount of straw fed by the straw should be controlled flexibly. It is advisable to use grass pulp to grow fish and feed 50-70 kilograms of water per mu per day. It is appropriate to cultivate seedlings. , Before the fry under the pool, use 100-150 kg of straw as the base fertilizer per acre of water in order to cultivate the food organisms in the water. After the fish are under the pond, they will be fed 50-100 kg per mu of water per day, or 120-1000 fish fry per day. 150 kg, feeding once every 2-3 days, feeding 15-20 days to go out. In order to allow the fish to fully ingest food, the whole pool should be sprayed evenly every day, 8-9 hours a day, and 2-3 hours a day to increase the chance of fish feeding and increase the utilization rate.
Clever control of water feeding grass pulp can easily cause pool water pollution, and new water must be constantly refilled to regulate water quality and increase oxygen content in the water and water space. During the rearing period, the hot slurry of lime is properly thrown in for sterilization and prevention. It can also neutralize the acidic substances produced by the decomposition of the straw, which is beneficial to the formation of bacterial flocs and the growth of plankton and increase fish production.
Cleverly collaborate in the rearing of reared or reared fingerlings or when feeding adult fish, try to avoid separate feeding of straw, and mix with fine material (grass pulp and concentrate ratio is 5-8:1). Feeding will be better. When water peanuts are used for pulping fish, because water peanuts contain saponin toxin, 2%-5% of salt should be added to the straw to remove the poison. Grass pulp should be fed in a timely manner after it is prepared. It should not be placed for too long to avoid contamination. Affects the quality of straw pulp and causes the fish to become ill.
Electronic Ballast For Cold Cathode UV Lamp
Electronic Ballast For Cold Cathode UV Lamp, Electronic Ballasts for Fluorescent Lamps
Ningbo Sunfine UV lighting Co.,ltd. , http://www.uvlightings.com