The main raw material is inkfish. Equipment and equipment Straw, rice dumplings, boxes, polyethylene bags, bamboo curtains, mats, etc. The production method is to select fresh inkfish and use a knife to cut the knife straight from the middle of the belly of the ink fountain to make it symmetrical, from the center of the water spray funnel to the head, and open the knife in the head to the left and right to make the head wrist. Unfold and turn the eyeball out (when cutting with a knife, cut the ink bag off). Remove the eyeballs and ink sacs, remove the viscera from the tail to the front and remove the internal organs (the other internal organs are processed separately). Rinse the fish and the internal and external dirt and ink with seawater or clean fresh water. Select the dry, concrete floor, or spread bamboo curtains. Mats, the clean fish first back drying, after drying belly, sun drying 3 to 5 times a day, to the back of the sun, pay attention to plastic when the sun, to maintain a smooth wrinkle-free fold. When the fish is dried to 70% dry, it is stored in a warehouse and covered with straw, etc. After about 4 to 5 days, the betaine and other nitrogen compounds in the fish are diffused and precipitated on the surface of the fish, causing a slight white frost. Hair flowers. After the fish has bloomed, dry it on sunny days and let it dry thoroughly. If after 4 to 5 days after the fish did not have flowers, the fish can be re-sun, and then the flowers on the collection. After drying, ink hoppers shall be graded, mounted or boxed, and discharged at a specified size. All sides shall be lined with bamboo leaves or grass pieces. Small packages can be packed in polyethylene food bags, sealed and stored for sale. Process selection fish → cut open → viscera → rinse → drying → hair flower → grade → packaging → finished product.
OBD Scanner
On Board Diagnostics(OBD)
It is a detection system extended for automobile fault diagnosis. "OBD" is the abbreviation of "on Board Diagnostics", which is the on-board diagnostic system. To standardize the diagnosis of automobile emission and drive-related faults. With the increasing degree of economic globalization and automobile internationalization, the OBD system will be more and more widely implemented and applied as the basis for drive and emission diagnosis. The OBD program makes automobile fault diagnosis simple and unified, and maintenance personnel do not need to learn the new system of each manufacturer. This system can monitor the operating status of the engine and the working status of exhaust gas aftertreatment at any time. Once a situation that may cause excessive emissions is found, an alarm will be issued immediately. The on-board system can also detect the working status of multiple system vehicle modules during the operation of the car. When a system fails, the engine warning light will light up. At the same time, the OBD system will store the fault information in the memory and read the relevant information in the form of fault codes through standard diagnostic instruments or interfaces. To help the diagnostician quickly and accurately determine the nature and location of the fault. In other words, OBD is a system that facilitates maintenance personnel to handle by obtaining information about the fault location.
Scanner Car,Auto Code Reader,Battery Tester,Bluetooth Inspection & Diagnostic Tools
SHENZHEN SANAN TECHNOLOGY CO.,LTD , https://www.sanan-cctv.com