1. The highest anti-corrosion material
  An internal cavity, an input port and the output member in contact with the medium, are full tetrafluoroethylene (PTFE) material which has high corrosion resistance, not worry corrosive solvent medium, such as acid, alkali, aqua regia Corrosion of chloroform, etc.
(Note: It is not only a layer of anti-corrosion coating that can be sprayed, it can't be done much. The spray coating will fall off, that is, the product that pollutes the transmission medium and has a short life!)
2. Cost-effective
  Compared with similar products at home and abroad on the market, not only the cost-effectiveness of the whole machine is high, but the cost of the loss parts in the pump is higher ! ---- The material cost of a set of loss parts is only a few hundred yuan!
(Note: The diaphragm and valve piece in the pump are lossy parts. If the experimental medium is highly corrosive, in order to ensure the use effect, it usually needs to be replaced once every 6-9 months! Especially the effect of the diaphragm on the vacuum degree of the pump. great)
3. Strong reliability
  Non-transportation, improper use (Note: Some customers use our gas pump as a water pump, or connect incorrectly, or do not follow the instruction manual's incorrect cleaning operation, etc.), the pump is almost fault-free!
4. Applicability is strong
  Adjustable: Pressure (Note: also flow) can be adjusted infinitely from a few liters to the highest flow to meet different experiments, or different experimental stages, and the vacuum level remains unchanged during the adjustment process ! (Note: This is an invention of my Auta brand full anti-corrosion pump with technical connotation!!)
  Washable: In order to prolong the service life of the consumable parts in the pump, it is regularly operated at low speed (Note: it must be running at low speed, that is, the adjustment knob on the panel to the position near the left end!), clean the pump with clean water or the experimental medium used daily. Inner cavity!
There is no need to worry about a small amount of liquid entering the pump chamber with the gas, which will not affect the normal use of the pump! ---- This is currently impossible to do with many diaphragm gas pumps on the market! !
5. No worries after sale
  We promise: If you purchase the Auta brand full anti-corrosion diaphragm pump products of our company , you only need to bear the material cost of the loss parts. During the warranty period: you can maintain it once for free, outside the warranty period: you only need to bear the transportation cost and the loss of the material. At the cost, you can enjoy the service of replacing the loss parts in the pump for free, and avoid the worry of replacing your loss parts and using them !
  If you want to change yourself to wear: Just follow our instructions, or under the guidance of our engineers, you simply need to operate, it will soon be, well replace the loss of parts within the pump! ! This will not delay your use, but also maintain the excellent quality of the Auta anti-corrosion pump!
Dehydrated millet onions are made by air-drying fresh millet onions for easy transportation and storage. It is used in family meals, restaurants and seasonings. Delicious and delicious, it is an indispensable spice in life. In life, people don't know how to eat dehydrated millet onions. Here are some practical methods of millet onions. First of all, dehydrated dried onions can stimulate the body's sweat glands and achieve the effect of sweating and heat dissipation. Scallion oil can stimulate the upper respiratory tract, making it easier to cough up sticky phlegm. Onions contain allicin, which has obvious anti-bacterial and viral effects. In particular, the inhibitory effect on Shigella and dermatophytes is more obvious.
Dehydrated Millet Shallot,Millet Shallots For Cooking Noodles,Dehydrated Millet Spring Onion,Delicious Dehydrated Millet Spring Onion
Laian Xinshuyu Food Co., Ltd , https://www.xinshuyufood.com