Household oil extraction machinery is a complete set of equipment that can be eliminated in the following ways after failure of various machinery in the combined equipment:
The main reason why the belt is not fed with oil is that the accumulation of oil in the lower part of the conveyor of the bucket elevator results in blockage. The lower door of the conveyor can be opened and the accumulated oil can be removed.
When sifting cloth oil unilateral inspection, if the screen surface is not horizontal, you should adjust the length of the left and right boom to equal; if the screen body appears torsion, you can adjust the eccentric shaft to make it perpendicular to the rack. If the airflow is not uniform, adjust the air deflector of the bellows so that the airflow is evenly blown toward the screen surface. If the screening rate is low, replace the new brush or adjust the length of the brush and adjust the tilt angle of the flat screen.
Roller overload non-rotating exclusion method is: if there is oil between the rollers when starting, you can loosen the roller adjustment bolts, remove the oil between the rollers; if the feeding speed is too fast, you can turn off the flap at the feeding port If the thickness of the billet rolled out is not uniform, the gap between the rolls should be readjusted and the loose nut tightened.
When the uneven steam cooker inspection, if it is a steam blower steam hole blocking or rust, should be open spray hole. If the blank is in the bottom of the pot, it can adjust the distance between the scraper and the bottom of the pan; if the scraper is worn and distorted, the scraper should be replaced.
FFP2 Mask,Particulate Respirator,FFP2 Particulate Respirator,Particle Filtering FFP2 Respirator
Henan Aklly Filter Engineering Co., Ltd , https://www.akllyfilter.com