1. Under the condition of permission, it is recommended that your laboratory should have three prevention conditions: shockproof (away from the source), moisture proof (using air conditioner, dryer), dustproof (floor laying on the floor); power supply: 220V ± 10%, 50HZ ; Temperature: 0 ° C - 40 ° C.
2. When focusing, be careful not to let the McAudi microscope objective touch the sample to avoid scratching the objective.
3. When the position of the center of the circular hole of the microscope stage gasket is away from the center of the objective lens, do not switch the objective lens to avoid scratching the objective lens.
4, the brightness adjustment should not be too big and small, and not too bright, affecting the life of the bulb, but also damage the vision.
5, all (function) switch, the action should be light, to be in place.
6. Turn off the brightness to a minimum when shutting down.
7. Non-professionals should not adjust the lighting system (filament position light) to avoid affecting the image quality.
8. Pay attention to high temperature when replacing the halogen lamp to avoid burns; be careful not to touch the glass body of the halogen lamp directly by hand.
9. When the machine is not used for shutdown, adjust the objective lens to the lowest state through the focusing mechanism.
10. When the machine is not used for shutdown, do not cover the dust cover immediately. After cooling, cover it again and pay attention to fire prevention.
The above points are only some places that should be paid special attention. I hope that everyone should be careful and careful during the use. If you have problems when using the microscope, you can contact the Beijing Khan Meng Zixing Instrument and Meter Co., Ltd. immediately. The company's microscope business is looking for a solution.
Beijing Khan Meng Zixing Instrument Co., Ltd. ()
Frozen Mussels,Frozen Cooked Clean Mussel Meat,Cooked Mussel Meat,Seafood Mussel Meat
Shengsi Huali Aquatic Products Co.,Ltd , https://www.mytilus-edulis.com