1. Clean the instrument immediately after each use.
2. After each use, the water in the constant temperature water bath is cleaned, and the coarse impurities in the constant temperature water bath are lightly brushed off with a brush, and the pot is removed. Wipe the inner and outer surfaces of the constant temperature water bath with a soft cloth, and then dry with a cleaning cloth.
3. Effect evaluation: The inner surface of the device should be free of water, and the outer surface of the device should be bright and tidy, without smudging.
4. When the constant temperature water bath is used, it must be grounded reliably, and the water should not overflow into the control box.
5. Do not use water or water level below the electric heating tube in the constant temperature water bath to prevent the electric heating tube from being damaged.
6. Perform maintenance inspection of the instrument once a month and fill in the maintenance record in time.
Constant temperature water bath application areas:
The constant temperature and constant temperature water bath is widely used in drying, concentrating, distilling, impregnating chemical reagents, impregnating drugs and biological products, and can also be used for constant temperature heating and other temperature tests in water baths. It is a biological, genetic, viral, aquatic, environmental, medical, health, and biochemical experiment. Room, an essential tool for education and research
Stainless steel constant temperature water bath is an indispensable tool for the chemical industry, colleges and universities, scientific research and environmental protection, petrochemical, printing and dyeing, mining and other industries to carry out distillation, drying, concentration and constant temperature heating of chemicals and biological drugs.
A stainless steel tubular heater is placed horizontally in a constant temperature water bath, and an aluminum shelf with a hole is placed inside the sink. The upper cover is equipped with a combination of different calibers to accommodate flasks of different calibers. There is a water discharge pipe on the left side of the constant temperature water bath. The right side of the constant temperature water bath is an electric box. The front panel of the electric box is equipped with a temperature control meter and a power switch.
Oropharyngeal Airway devices are often used as [bite blocks" after a patient's trachea has been intubated, in order to prevent the clenching of the teeth on the Endotracheal tube. Oropharyngeal airway devices are responsible for up to 55% of anesthesia-related dental complications.
Features&Benefit
Oropharyngeal airway is made of medical grade PE.
Maintains a gas pathway through the oral cavity and pharynx.
Araumatic soft-rounded edges.
Anatomically correct design.
Resists to collapse.
Smooth inner and outer surface.
Bite block provides access fro suction catheters.
Flexible to ensure dental protection.
Sterile and clean pack bulk packaging.
Color coded.
Available with FDA, ISO certificates.
Color-coded for easy sizes identification.
Size 40mm/000#-120mm/6#, Suitable for neonate, pediatric ,adult
As a leading medical device manufacturer, Trifanz can offer a large range of anethesia and respiration products, OEM and ODM service also available. Welcome to contact us if you have any inquiries.Pattern Guedel Airway, Medical Airway Management, Disposable Oropharyngeal Nasal Airway, Guedel Oropharyngeal Airway, Guedel Opa
Hangzhou Trifanz Medical Device Co., Ltd , https://www.cfzmeds.com