Strengthen management and enhance resistance to disease
Satisfy the needs of pigs for all kinds of nutrients, keep pig houses and sanitation, and feed properly mix and modulate. It is forbidden to feed moulds, degenerate feeds, and forage grasses, so that coarse materials can be finely fed, regularly quantified, and less frequently added. Feed conversions should be gradually carried out, and sufficient drinking water should be provided.
Self-cultivation and intensive quarantine
Self-cultivation is an important measure to prevent the spread of disease. The purchase of breeding pigs or piglets from other places or markets should be purchased from places where there are no infectious diseases, and the purchased pigs must be quarantined by local veterinary authorities and issued relevant quarantine certificates before shipment. Pigs that have just been purchased cannot be immediately polycultured with the original pigs in the pigsty. They must be isolated and observed for one month to confirm that they are free from disease before they can be reared in groups.
Do preventive medicine and deworming
1. When preventing medications, first check whether the bottle mouth and plastic cover are completely closed, and the injection site needs to be disinfected with 75% alcohol cotton balls. In addition, the diluted vaccine should be used up within 4 hours. 2. According to the prevalence of major parasitic diseases in the area, anthelmintic drugs are selected to periodically repel insects.
Do a good job in cleaning and disinfection
Elimination of pathogenic microorganisms in the external environment and cutting off the spread of infectious diseases. When disinfecting a pig house, the pig should be driven out first, and the feed, excrement in the feed tank, and the dirt on the walls and the top of the circle should be removed and then sterilized. Disinfectant can use 20% quicklime solution, 5%~20% bleach solution, 0.5% potassium permanganate and so on.
Tof(Time-of-flight), is JRT new product, which is a single-point LiDAR sensor. With a micro size of 46x17x7mm, customers can widely use in many Laser Measurement Solutions. The lidar distance sensor can measure 12m short-range. It's great for Unmanned Aerial Systems.Contact Us Now for data sheet.
| Product Name | Tof LiDAR Sensor |
| Model Number | IT02S-65-A/IT02S-65-B/IT03M-650 |
| Measuring Range (without Reflection) | 0.1-12m/0.1-10m/0.1-15m(90% reflectivity) |
| Place of Origin | China |
| Accuracy | 2cm~4cm/5cm |
| Blind Area | 10cm |
| Resolution | 1cm |
| Measuring Unit | centimetre |
| Laser Class | Class II, red |
| Laser Type | 650nm, <1mW |
| Communication Interface | UART, 115200bps(default) |
| Size | 46*17*7mm/50*26*13mm |
| Weight | About 4g/10g |
| Voltage | 2.7V~+3.6V |
| Electrical Level | TTL/CMOS |
| High Frequency | 100hz |
| Operating Temperature | 0-40 ℃ (32-104 ℉ ) |
| Storage Temperature | -25~60 ℃ (-13~140 ℉) |
ToF Sensor,Time of Flight Sensor,LiDAR Distance Sensor,ToF Distance Sensor
Chengdu JRT Meter Technology Co., Ltd , https://www.cdlaserdistancesensor.com