Cold weather in winter can feed piglets with nutritious and easily digestible feeds and increase their resistance.

For feeds such as soybeans, broad beans, adzuki beans, etc., their crude protein content is rich, accounting for about 20% to 40%, starch, sugar content is lower than cereals, vitamins, minerals content is close to the level of cereals. Before the farmers feed the legumes to the piglets, they must be heated to 110°C for at least 3 minutes.

At the same time, due to lack of green feed in winter, piglets are prone to vitamin A deficiency, and severe cases can cause death. Vitamin A can be increased by feeding carrots. The first is feeding the sow with carrots to increase the vitamin A content in the sow's milk. The level of vitamin A in sow milk is closely related to the supply of carotene in the feed. Sows are often fed with carrots, which allows the sow to secrete milk with high vitamin A content. Piglets eat sow milk with high vitamin A content can not only prevent vitamin A deficiency, but also be very beneficial to their growth and development.

The second is to feed the piglets with carrots. After the piglets eat the ingredients, the carrots can be cooked and smashed and added to the yellow corn porridge for free feeding. If the piglet is already suffering from vitamin A deficiency, the cooked egg yolk can be crushed, warmed by boiling water or milk, and allowed to freely drink or artificially fed for several days.

Water Test

Water is vital to human life. Drinking water, swimming pool water, SPA water, aquarium water, pond water, related to the quality of everyone's life, how do you ensure the quality of water? Water quality test strips, of course. These convenient and easy-to-use strips quickly and accurately test for a range of contaminants and keep you and your family safe.


Water Quality Test Introduction
Water Quality Test Strips can provide Fast and Accurate water test results for 39 parameters such as pH, Total alkalinity,Residual chlorine,Total chlorine,Nitrate, NitrIte, Hg, Lead, Iron, Copper, Fluoride, Cyanuric acid, Bromine, Cr, Hardness, Sulfate, Carbonate root, Hydrogen carbonate root, Quaternary ammonium salt, Potassium permanganate,Sulfite, VC, Calcium, hydrogen peroxide, Escherichia Coli, phosphate, Sulfuretted Hydrogen, chlorine dioxide, peracetic acid,sulfur dioxide, Ammonia Nitrogen, Ammonium Chloride,lodine,Aluminum,Zinc,salt kalium/potassium, manganese,phosphorus.
We offers a full line of high quality, professional Aquarium test strips, Pool & Spa test strips and Drinking Water Test Strips to help customers meet their water testing requirement.

TEST PROCEDURE
Immerse the strip for 2 seconds and then remove the strip.
Do not shake excess water off, and then hold the strip horizontally for 20 seconds.
Compare against the color chart and read immediately within 30 seconds to get accurate result.
IMPORTANT TO KNOW
1.Test for 30 seconds
When using the water test strip, your results are complete (ready to compare) after dipping the
test strip. Upon completion, make sure to compare your results immediately. The strip is no
longer valid outside of the 30 second testing period Discard the test strip after 60 seconds as
any further color change will be meaningless.
2.Prevent altered results
Here`s what you can do to prevent decreased shelf life of the strip and altered results
Do Store in a cool dry place away from direct sunlight.
Do read the instructions carefully before use.
Do Avoid touching or polluting test areas of the strip.
Do not place wet fingers in the bottle.
Do Keep the cap on tight between use.
Do not remove the desiccant pouch.
3.Primary and Secondary water Regulations
The EPA sets legal limits on over 90 contaminants in water test strip. There are two categories,
primary and secondary. Primary contaminants are substances that can be toxic in small amounts
On the other hand, secondary contaminants are less toxic species and would include cosmetic
issues (color, taste, and odor) of water. These strips test for the most commonly found primary
contaminants lead, fluoride, copper, chlorine, nitrite, nitrate) as well as the most commonly found
secondary contaminants(Copper, Iron, Sulfate, Zinc, Manganese, Fluoride, Chloride, and pH)



Water Test,Fish Pond Water Testing,Ph Water Tester,Water Quality Testing

Changchun ZYF science and technology CO.,LTD , https://www.zyf-medical.com